Product ID:F41-4102-710 CANON CARTRIDGE A-30 (BLACK)
MSDS Date:12/01/1991
FSC:6850
NIIN:01-371-1596
MSDS Number: CFYGZ

CANON U.S.A., INC.

ONE CANON PLAZA
LAKE SUCCESS, NY 11042
US

Emergency Phone: 516-488-6700/800-424-9300(CHEMTREC)

Info Phone: 516-488-6700

Cage: 08YZ7

CANON USA INC

NEW HYDE PARK, NY 11042 US

Telephone: 516-328-5000; 5600

Cage: 08YZ7

STYRENE ACRYL COPOLYMER

Fraction By Weight: 55-60%

IRON OXIDE

CAS: 1317-61-9

Fraction By Weight: 30-40%

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3

MANUFACTURER CONTACT STATES ALL OTHER INFORMATION IS

RTECS: 9999999ZZ

Fraction By Weight: NA

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TONER IS NOT ACCESSIBLE UNLESS
CARTRIDGE IS FORCED OPEN OR BROKEN INTO.INHAL:TONER FINELY DIVIDED
SOLID.DONT BREATH DUST.EYE:NO SPECIFIC HAZ IS KNOWN TO
CANON.HOWEVER ANY MATL THAT CONTACTS EYE MAY BE IRRIT.SKIN:LOW HAZ
FOR INDUSTRIAL HNDLG
Explanation of Carcinogenicity:PER MSDSD:CONCERNING CARC INGREDS LISTED
ARE NOT LISTED IN LATEST NTP/IARC/OSHA.
Effects of Overexposure:TONER FINELY DIVIDED SOLID.DOTN BREATH
DUST.EYE:NO SPECIFIC HAZ IS KNOWN TO CANON.HOWEVER ANY MATL THAT
CONTACTS EYE MAY BE IRRIT.SKIN:LOW HAZ FOR INDUSTRIAL HNDLG.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE FROM EXPO TO FRESH AIR.EYE:OPN EYE & FLUSH
W/PLENTY OF WATER.IF IRRIT PERSISTS GET MED ATTN.SKIN:WASH
W/SOAP/WATER.INGEST:DRINK SEVERAL GLASSES OF WATER.CALL PHYSICIAN.

Flash Point:NA
Autoignition Temp:Autoignition Temp Text:NA
Lower Limits:NP
Upper Limits:NP
Extinguishing Media:WATER, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:MATL LIKE MOST ORGANIC MATLS IN POWDER
FORM IS CAPABLE OF CREATING DUST EXPLOSION.NON-FLAMM SOLID
(ACCORDING TO 16CFR1500.44 TEST METHOD).

Spill Release Procedures:SWEEP MATL ONTO PAPER & PLACE IN FIBER CARTON.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN.KEEP
FROM CONTACT W/OXIDIZING MATERIALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NONE SPECIFIED BY MANUFACTURER.
Ventilation:GOOD GENERAL VENTIALTION SHOLD BE SUFFICIENT.
Protective Gloves:NONE REQUIRED
Eye Protection:NONE REQUIRED
Other Protective Equipment:NONE
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PER CTDF:PART NUMBER CHANGED.

HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NA
Decomp Temp:Decomp Text:NP
Vapor Pres:NEGLIGIBLE
Vapor Density:NA
Spec Gravity:1.4
pH:N/DETR
Viscosity:NP
Evaporation Rate & Reference:NEGLIGIBLE,BUTYLACETATE=1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE POWDER, SLIGHT PLASTIC ODOR
Percent Volatiles by Volume:NEGLIG
Corrosion Rate:NP

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AS W/ANY OTHER ORGANIC MATL,
DECOMPOSITION WILL PRODUCE CARBON DIOXIDE & CARBON MONOXIDE.

Waste Disposal Methods:NO SPECIAL DISPOSAL TECHNIQUE REQUIRED.ENSURE
COMPLIANCE IWTH FEDERAL, STATE AND/OR LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.